User's Manual

INVENSYS RF GATEWAY GENERAL INSTRUCTIONS
4 PRELIMINARY DOCUMENT TD2002
TABLE 1. LED indicator descriptions
Operation
The Invensys RF Gateway is pre-configured to automatically use the WAN interface for
connecting to the GoodWatts.com server. After a connection is made, the home-specific
information is downloaded into the gateway and the RF device network is started, as
shown in FIGURE 4. GoodWatts RF device network.
FIGURE 4. GoodWatts RF device network
LED Status Indication Action
Green Blinking (1 blink) Process basic hardware testing Wait for LED status change
Green Blinking (2 blinks) Process extensive hardware testing Wait for LED status change
Green Blinking (3 blinks) Process software testing Wait for LED status change
Green Blinking (4 blinks) Indicates Internet (WAN) connection
needs configuration via Invensys RF
Gateway
software
Contact Technical Support
Solid Green light Indicates Internet (WAN) connectivity
is complete
No action necessary
Red Blinking An internal failure has occurred Contact technical support
Gateway
Thermostat
M
e
t
e
r
L
o
a
d
Contr
o
l
M
e
t
er