User's Manual
User Manual
XC-RF855 Reader
5
4. Structural Features
4.1 Overall Structure Component
XC-RF855 reader consists of RFID module, antenna, power supply and casing.
4.2 Interface Panel Description
Figure 4.2 Interface Panel
Interface panel description as follows
：
1——Power interface (DC 5V/4A),is used to connect the 5V/4A power adapter.
2——USB communication interface,is used to communicate with PC.
4.3 LED Panel Description
Figure 4.3 LED Panel Description
LED Panel Description as follows
：
1——The power indicator When the reader is powered on, the power indicator
shows red. indicates that the reader is connected to the power supply.
2——Working indicator.When the working indicator shows and flashes
green,indicating that the reader is reading tags.
4. Structural Features
User Manual
XC-RF855 Reader
6
5. Installation and Commissioning
Please read the chapter carefully before installing XC-RF855 reader.
5.1 Safety during installation
The power adapter that is equipped with this equipment is AC power 100V -
240V. Please check your voltage range properly before using the external power
supply.
The input voltage range of the DC power outlet of this product is 4.5V
～
6V.
Please check your voltage range properly before installation!
The reader should be install in sheltered and well-ventilated places, protected
from the rain, humidity and the sun (not suitable for places with high humidity).
Note that the USB line is well connected.
Any radio transmitting equipment, including this equipment, may cause in-
terference with medical equipment that is not properly protected. If there is any
problem in this regard, please consult with the medical equipment manufacturer.
The operation of this equipment may also cause interference with other elec-
tronic devices.
5.2 Installation requirement
Before the installation of XC-RF855 reader, please make sure the product is in-
tact, the accessories are complete. Should there be any discrepancy or damage,
please contact the local supplier immediately for replacement. At the same time,
please check if the following items fulll the installation requirement
Compactible with the operating environment.
Complete list of accessories that are sufcient to fulll the required standard
and form a complete tag reading and writing environment.
5.3 Connection
Connect the XC-RF855 reader with the PC.
5. Installation and Commissioning