User's Manual

User’s Manual to XCRF-502E Reader
Internal use.only. Any transmission is not
allowed without permission.
45
enough distance between two tags installed on a same object.
The interactive interference among several electric tags
occurs when their separation distances are less than 10cm
and they are equidistant to the antennas.
Þ Don’t expose the electronic tags not encapsulated to
chemicals. Some chemicals, like alcohol, have slight
influence on the electronic tags at ordinary temperatures,
whereas they will be corrosive to certain extent when the
temperature rises
.
8 Transportation and Storage
8.1 Requirements on Transportation
XCRF-502E Reader satisfies the requirements specified in
relevant standards on road, railway, air and water transportation.
Precautions during the transportation: make sure the violent
collision, exposure to rain, erosion of the corrosive chemicals and
harmful gases must be avoided.
8.2 Requirements on Storage
The warehouse for long-term storage of XCRF-502E Reader
must satisfy the following conditions:
Þ Ambient temperature:-20℃ to +40℃；
Þ Relative humidity: not greater than 80%;