User's Manual

User’s Manual to XCRF-502E Reader

Internal use.only. Any transmission is not

allowed without permission.

Fig. 5.10 Connection of XCRF-502E Reader to the PC via Serial Port

5.4.3 External AC Power

Please put through XCRF-502E Reader’s external AC power by

the following steps.

1. Make sure that the AC power’s voltage and working

frequency conform to the requirements: AC100V to 240V or 50Hz to

60Hz;

2. Make sure that XCRF-502E Reader’s switch is at the Off

position;

3. Insert a power cable into the AC power’s outlet, and then

insert its another end into XCRF-502E Reader’s 3-core AC power

input port;

4. Turn on the power switch on XCRF-502E Reader’s front

panel; the POWER indicator lamp will be turned on after the Reader

gives off a sound notice, which indicates that the Reader is initializing;

after the initialization, the Reader is standing by.

XCRF-502E Reader