User's Manual

User’s Manual to XCRF-502E Reader
Internal use.only. Any transmission is not
allowed without permission.
23
4） Select the “Communication Mode”
Select the network port mode of “TCP” in the “Communication
mode”.
Fig. 5.6 Selection of Network Port Mode
5） Open the Reader’s port, to check whether the connection is
“OK”.
Click “Connect”; the indicator lamp of “Connect” status will be
yellow if the connection is successful and relevant notice will appear in
case of failure.
Fig. 5.7 Illustration of XCRF-502E Reader Creating Connection
The IP address must be identical to the actual IP address of the
Reader, when opened with the network port; additionally, the network