User's Manual

User’s Manual to XCRF-502E Reader
Internal use.only. Any transmission is not
allowed without permission.
22
2） IP Address Configuration
Select “Configuration”->“Configuration of the Reader’s
parameters”, and set the Reader’s IP address in the pop-up dialog box
“Configuration of the Reader’s parameters”, as illustrated in Fig. 5.5:
Fig. 5.5 IP Address Configuration
Click “Configuration” to close the dialog box.
Reset the IP address with TCP connected according to the same
steps above.
If the network connection will be successful, the domain name
of the set IP address must be identical to that of the host (the Reader’s
default IP address is: 192.168.0.210).
3） Restart the Device
Turn off your Reader. And then turn on the power supply to
restart the device.