User's Manual

XCRF-860 USER’S MANUAL
34
The baud rage of reader is 115200bps; Check if the ☆
value of XC_BaudRate in the file:sysit.cfg under the installation
directory is 115200.
☆ Check if COM port matches the connection of
XCRF-860 reader and PC.
☆ If the serial port cable is correctly connected, as
disconnection or loose connection may result in the failure to
receive the PC’s instructions to XCRF-860 reader.
Network Pork Connection Failure:
Check ☆ if the USB driver is installed in the PC; if not,
install the USB driver as instructed in 6.4.
Check ☆ if the USB cable is correctly connected, as
disconnection or loose connection may result in the reader’s
failure to receive the PC’s instructions to XCRF-860 reader.
Card Read Failure
☆ Check if the serial port cable, USB cable or network
cable is connected, as disconnection or loose connection may
result in the reader’s failure to receive the PC’s instructions to
XCRF-860 reader.
Check if SMA connector of antennas are screwed up, ☆
and if the tags are damaged.
Check if the selected “antenna number” is that of the ☆
antenna used.
Check☆ if the “estimated number of tags to read” is
approximate to that of the tags within Antenna’s coverage range.