User's Manual

XCRF-860 USER’S MANUAL
31
The reader’s operating frequency is 902.75MHz to
927.25MHz. The frequency gaping is 500KHz, and the reader
has 50 operating frequency points. The default operating
frequency configuration is “frequency hopping”: “Default A”; the
frequency points range from 902.75MHz to 910.25MHz, with 16
frequency points. RFID Demo software also provides a “Default
B” for frequency-hopping, of which the frequency points are ,
with 16 frequency points.
How to configure the frequency point: click “configuration”
on the main interface → select “Frequency Hoping Manager” →
select “Frequency Hoping” on the pull-down manual named
“Frequency Hoping Selection”→ select the frequency on the left
list box by clicking
or → the frequencies selected will
display on right list box → click “confirm” to complete the
reader's operating frequency configuration.