User's Manual

XCRF-860 USER’S MANUAL
30
that the reader operates alternately on the specified antennas of
“1# - 2#”. “1# - 3#” indicates that the reader operates alternately
on the specified antennas of “1# - 2# - 3#”. “1# - 4#” indicates
that the reader operates alternately on the specified antennas of
“1# - 2# - 3# - 4#”.
1. Reader interrogates RFID tags
Configure the “estimated number of tags to read”
approximate to “number of tags which are read”; select
“circulatory” (circulatory read of tags) or “one time” (read tags for
one time) in pull-down manual of “read mode”; then click
,
and "tag number”, “read time”, “read times” and
“antenna number” display on main interface.
Fig. 6.14 Tag Read
2. Operating Frequency Configuration