User's Manual

XCRF-860 USER’S MANUAL
10
☆ if the tags are damaged.
z The read/write range does not meet the requirements:
The positioning of the antennas;☆
☆If any interference exists on site.
3.4 Attentions to install
To guarantee personal and property safety, the following
preparations must be performed before installing and operating
the XCRF-860 reader:
Check the performance of the power plug, and if the
power supply conforms to the power requirement of the
reader.
Equipments should be connected to ground!
The installation location must be damp proof and
have sunscreen, and be well-ventilated;
The distances between the equipments and the
system (e.g. the reader and the antennas, the reader and the
PC, and the reader and the power plug) must be measured
and estimated;
Check if the installation locations and directions of
the reader and the antennas result in signal interference to
data transmission between the reader and the tags;