User's Manual

18
enabled.
(2) Power Amplifier disable test: Power Amplifier is off after
the system start-up and initialisation. Power Amplifier
could be disabled by “Disable Power Amplifier” command.
The indicator “PA” on front panel of reader will be off after
Power Amplifier is disabled.
(3) Electronic tag reading test:
² Single tag reading test: test reading the tag ID number,
partial or entire data in designated electronic tag;
² Multi-tag reading test: test reading multi- tag ID
number, and the memory data of the designated
electronic tags among multiple.
(4) Electronic tag write test:
² Single tag writing test: read tag ID number; update the
data in designated position or total data in tag memory;
writing-protection test.
² Multi-tag writing test: read multi-tag ID number, read
or update the data in designated tag memory;
writing-protection test.
(5) Read-range test: Read single tag to test its read-range, and