User's Manual

User Manual
XC2907-A Portable Reader
8
5. Common functions and settings
"shutdown" is selected, the screen will be completely extinguished and the
system will be turned o. If "restart" is selected, the screen will be briey closed
and then enter the boot screen.
[Reset operation]:
If the device crashes and any keystroke operation does not respond, you may
need to reset and restart the device.
Operation methods: Pressing the device power key for more than 10s, the system
will automatically restart.
5. Common functions and settings
5.1 Data synchronization between installing USB drive and PC
XC2907-A portable reader is connected to PC of Win7 and above system via the
attached USB connecting line. The system will automatically install the driver to
complete the connection process. If it is a WinXP system, you need to manually
install the driver to connect it.
After successful connection, you can view the handset content via PC. If it
cannot be viewed, you can view the operation by changing the connection mode.
The specic steps are as follows:
1) Enter the main interface of handset;
2) Drag the screen and click "USB charging" and "le transmission".
As shown in Figure 5-1:
Figure 5-1 USB transmission