User's Manual

l Data memory section: to select the data memory section for operation from the drop-down list.
l Text Area: to display or input data.
l Read: to perform read operation.
l Write: to perform write operation.
l Option: click to jump into another interface shown as figure 2-8.
Figure 2-8 Read/Write tag
∘ Write mode: Default, Block write or Block erase.
∘ Block length: the length of block to be operated, measured in bytes. The setting works
providing that the write mode is set to block write or block erase.
∘ Block size: the number of blocks to be operated measured by bytes. The setting only works
if the write mode is block erase.
∘ OK: to perform the settings.
2.2.4 Power
Path: RFID --> Option --> Power
Settings: You could view or set the value of the antenna power on the interface shown as figure 2-9.
Figure 2-9 Antenna Power
l Value: To display or set the value of the antenna power, measured by dBm. The selection is 21,