User's Manual

Figure 2-34 Data receiving software
The program will monitor automatically.
Then, please open the demo software on RFID handheld reader, select “RFID--> Option--> data config”, as shown
below.
Figure 2-35 Data configuration
Please see the chapter 2.2.11 Data set for the description of this interface.
Tick “upload data”, enter the IP address of the PC where runs the data receiving software. The port should be the
port monitored by the program on the server (6543 in default). Click “OK” to return to the RFID interface. Then,
click the button “Scan”.