User's Manual

Figure 2-32 connect the wireless
If it is necessary to modify the setting of the target network, please double-click the target name. Then, another
interface will come up, as shown below.
Figure 2-33 Wireless Properties
If the password identifying is not configured, the text box for encryption will display “Forbidden”, otherwise you
need to enter correct password. After modifying the settings, click “OK” to perform the settings and return to
wireless information interface. Then, the reader will be connected to the target network( if the connection is not
made automatically made, please click the target network and click the button “OK” to connect).
2.7 Data receiving software(PC)
Data receiving software is run on the PC, cooperating with the RFID demo software, receiving data sent by
the demo software. Open CommunicationServer.exe on the PC, the interface is shown as below: