User's Manual

Figure 2-25 Version
l Software version: the version number of software.
l Operation System: the version number of the operation system.
l Inner System: the version number to distinguish customization of operation system.
2.4 Read Barcode
The interface is to display how RFID handheld reader reads barcodes.
2.4.1 Read operation
Click to enter read barcodes interface, as shown below:
Figure 2-26 Barcode
Click button “Read”, barcodes scanning begins. Make the scanner toward to the barcode and the laser
beam horizontally through the barcode. The scanning is set to singe reading in default. In other words,
the reader will stop as soon as the barcode has been read for once. (Note: the single operation can also
be performed by pressing the key [SCAN] on the reader)
The scanning result is shown as below:
You can set loop reading in “Option” referring to chapter “Option” below. Then, the reader can read a