User's Manual

Settings: set or cancel filtering overlap tags by time. In other word, a tag will be read for once in
specified time. The interface is as shown in figure 2-15.
Figure 2-15 Overlap Filter
l Time: set the overlap filtering time, measured by milliseconds. The value is limited from 0 to
65535.
l Cancel: cancel overlap filtering.
l Set: perform the settings.
2.2.10 Find Tags
Path: RFID --> Option --> Find Tags
Settings: set conditions to scan tags that are in these conditions
Figure 2-16 Find Tag
l Offset: to set the offset byte of the tags to be matched.
l Find Data: to set the data memory area of the tags to be matched, “TID” or “EPC”.
l Text area: to enter the key word in the tags to be matched. The text area cannot be empty.
l Find: click to jump back to RFID interface and the scanning result will be displayed in the table.