User's Manual

2.2.8 EAS
EAS is available on tags with NXP tag chips. An EAS flag bit is provided on an EAS tag. After enabling EAS
flag bit, EAS will be on. If tags with enabled EAS flag bits are located in reader field, data of tags with
configured EAS flag bit (alarm information) will be returned. EAS can be disabled by power off operation
instruction.
Figure 2-13 EAS Alarm start
Path: RFID --> Option --> EAS
Click button , the EAS Alarm starts. The opening status of EAS alarm will be displayed on the RFID
interface as shown in figure 2-14. Then, you can click the button “Stop” (the button will transfer to
“Scan” when EAS alarm is stopped) to stop EAS alarm, as shown as figure 2-14.
Figure 2-14 EAS Alarm stop
2.2.9 Filter
Path: RFID --> Option --> Filter