User's Manual

User’s Manual
XC-RF812 Reader
21
Step: Set interval time of write data .
Fixed ending: Set a xed data to be written on a tag memory bank.
Locking: Encrypt written data operation.
Get Data: Get the written tag data source.
● UserData:
Block write, and block length: Set block write on specic tags, and set block
length.
Fixed beginning: Set the initial xed data to be written.
Step: Set interval time of write data operation.
Fixed ending: Set a xed data to be written on a tag memory bank.
Locking: Encrypt the written data.
Get Data: Get the written tag data source.
● Reserved block:
Set Access Password: Password is required to access tag memory.
Set Kill Password: Password is required for kill tag operation.
6.4.5 Issue tag operation
When issue mode conguration as shown in Figure 6.4.4 is complete, user can
perform issue operations which include “General” and “Advance” modes. Two
issue modes including “manual” and “automatic” are described as follows:
● Manual: 1 - Click "Scan" -> "Stop Scan" -> 2 – write data on EPC memory
block -> 3 – Click “Write"
6 Operating RFID Demo