User's Manual
User’s Manual
XC-RF812 Reader
20
“Cong” screen is described as follows:
● Scan memory bank: Set the memory bank to be read
● Antenna: Select the corresponding antenna
● TID length (6C): Set the TID length
● User length (6C): Set the length of user memory bank of 6C tags
● User length (6B): Set the length of the user memory bank of 6B tags
● Automatically issuing interval: interval time for issue operation
● Attempts of issue operation: set the number of attempts to performs issue
operation after a failed issue operation
3, Once congured, click on the "Issue" button, and a pop-up dialog box appears
as shown in Figure 6-16.
Figure 6-16
The Issue screen includes “General” and “Advanced (6C)” modes. The “General”
mode includes “EPC, UserData and reserved block”.
● EPC
Block write, and block length: Set block write for specic tags, and set block
length.
Fixed beginning: Set the initial xed data to be written.
6 Operating RFID Demo