User's Manual

User’s Manual

XC-RF812 Reader

6 Operating RFID Demo

required parameter of “Power adjustment” (9 to 30dbm), and then click on the

“Cong”. Click on the “Query” to get power adjustment information.

6.4.3 Scan conguration

Scan conguration setting mainly includes read mode. Click the “Scan param”

in Figure 6-13. The “Scan Cong” dialog box appears.

Figure 6-13

1, 6C tag read conguration (double-byte)

EPC: Check the EPC to read the adaptive length of EPC number.

TID: Check the TID, and you can set the length of data to read.

UserData: Check the UserData, and you can set the length of data to be read

2, Tag lter

Check tag lter. In the drop-down box, select the EPC or TID. Fill in the data

of which the tag to be ltered. And the tag with specied data content can be

acquired in the next read operation.

3, 6B tag conguration

UserData: check UserData, you can set the length of the parameter to be read

and the starting address.