User's Manual

User’s Manual

XC-RF812 Reader

5 Installation and Troubleshooting

Please read and understand this chapter before installing the XC-RF812.

5.1 Installation tips

In order to ensure your personal and property, the following preparations are

required before installing XC-RF812.

This product uses DC + 5V / 4A DC power supply. Carefully check

voltage range before installing the XC-RF812!

The installation location should be free from rain, moisture and sunlight,

and is well ventilated.

Check the USB cable or network cable connection is good.

Any radio transmission equipment, including the XC-RF812, may cause

disturbance to the performance of medical devices that have no proper

protection. Please consult the manufacturers of relevant medical devices

to avoid such event. This equipment may also cause disturbance to other

electronic equipment while it is in operation.

5.2 Installation conditions

Before installing the XC-RF812 reader, please carefully check the product is in

good condition, and the accessories are complete. Please check the product and

its accessories according to the packing list. Please contact us immediately if

there is any discrepancy or damage.

In addition, check whether the installation meets the following conditions:

● Complying with workplace standards;

● The accessories are complete and meet required standards.

5.2.1 Connecting the XC-RF812

Connect the reader to the PC.

Connect the XC-RF812 reader to the PC with a network cable or a USB cable.

The PC IP address and reader IP address must be in one network segment (default