User's Manual

User Guide
18
according to the needs, shall be limited to a thickness of 5~30mm, and
big 32~16 Kaiben.
Paste an ISO/IEC18000-6C electronic tag at the center of spine,
trying to ensure installation in the middle of book pages wherever
possible; if a book has already been installed with an anti-theft
magnetic strip, the electronic tag shall be installed in a position away
from the anti-theft magnetic strip as far as possible, as shown in Figure
6-2.
When pasting an ISO/IEC15693 book tag, it’s recommended to
paste the tag at the center of back cover, close to the position of spine.
Figure 6-2 Book Tag Pasting
6.4 Basic Operation & Process of Equipment
1) Self-service application for a reader card
To use this function, the operator must have a second-generation
ID card of the People’s Republic of China. See the equipment structure
diagram (Figure 2-1), put the ID card close to the ID card reading zone,
and if reading successfully, the equipment will display the ID card
information. After entering the contact phone and confirmation on