User's Manual

User Guide
15
according to the working status.
8) Flexible configuration requirements
The single self-service library system terminal structure
adopts modular design, which can split or assembled quickly,
can support overall or partial deployment according to the
implementation site, and can, as per the request of the
managing party, add publicity and advertising functions such
as display, instruction, framework, etc., on the basis of the
existing equipment.
6 Use & Operation
6.1 Connection
1) The use site must be equipped with a distribution box, in
which an electrical leakage protection switch (rated
residual current: 30mA) and an air switch are required,
with power demand of AC220V±10%, 50Hz～ 60Hz,
20A, and reliable grounding shall be available.
2) When there is a need for networking with the central
library, a network interface will be required, and the
network bandwidth shall be not lower than 100M.
6.2 Installation & Maintenance
The front operating area of the equipment has a width of 0.7m
available for use as the user operation area and maintenance access line;