User's Guide

LSP3A Clear User’s Guide
It is only for internal use and shall not be spread without permission
2
1.3 Important Safety Information
When connecting the device or any accessory to another device, read its user’s guide for
detailed safety instructions. Do not connect incompatible products.
As with all RF equipment, users are advised that the equipment should only be used in its
normal operating mode described in this document.

2 Certification
2.1 Occupational Health and Safety Notices
INVENGO Products have been designed not to exceed the limits given in the European
Standard EN 50364 “Limitation of human exposure to electromagnetic fields from devices used in
Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar
applications” in conjunction with the European Standard EN 50357 describing how to evaluate the
exposure level.
2.1.1 Public Exposure
The Library RFID pedestals are designed assuming that patrons cross the detection area
within a couple of seconds on their way in and out of the Library at a normal walking pace.
General public should not stand in the detection area for more than 10 to 20 seconds.
2.1.2 Employees Exposure
The operators are located apart from the principal detection zone and as a matter of fact,
not subject to exposure.
(Please see section 4.3.2 “Placement of Pedestals”)
Librarian should make sure that nobody stands still in the Gate Detection
Area in between two RFID Pedestals to avoid unnecessary prolonged
Exposure to Electromagnetic Field.
2.2 Safety Notices
The LSP3A has been tested to be in conformity with the EN standard 60950-1: “Information
Technology Equipment Safety”
For servicing operations it is recommended to deactivate the RFID system.
It is the responsibility of the CIT (Certified Integrators by INVENGO) to install the LSP3A as
described in INVENGO Product Manuals or INVENGO Documentation.