User's Guide

LSP3A Clear User’s Guide
It is only for internal use and shall not be spread without permission
1
1 For Your Safety
1.1 General Use
The LSP3A product range is designed to be reliable and to provide continuous, trouble-free
service. Please observe the following general tips:
1. Take care not to scratch the device. Keep the device clean. When working with the
device, use only INVENGO-approved accessories.
2. This device is not waterproof and should not be exposed to rain or moisture. Under
extreme conditions, water may enter the circuitry.
3. Protect the device from extreme temperatures. For example, do not place the device in a
windowed area where the sun may cause extreme temperatures, and keep it away from
heaters and other heat sources.
4. Do not store or use the device in any location that is extremely dusty, damp, or wet.
5. Use a soft, damp cloth to clean the device. If the surface of the device becomes soiled,
clean it with a soft cloth moistened with a diluted window-cleaning solution.
1.2 Care and Maintenance
This device should be handled with care. The suggestions below will increase the lifetime of
this device.
1. Keep the device dry. Precipitation, humidity and liquids contain minerals that will corrode
electronic circuits and tarnish transparent plastic parts.
2. Do not use or store the device in dusty, dirty areas. Its moving parts can be damaged.
3. Regularly dust the large transparent part using a soft cloth and antistatic liquid.
4. Do not store in hot areas. High temperatures can shorten the life of electronic devices,
damage batteries and warp or melt certain plastics.
5. Do not store in cold areas. When the device warms up (to its normal temperature),
moisture can form inside the device, which may damage electronic circuit boards.
6. Do not attempt to open the device. Non-professional handling of the device may damage
it and will void the INVENGO warranty.
7. Handle the device with care. Shock and vibration may break internal circuit boards.
8. Do not paint the device. Paint may clog the device’s moving parts and prevent proper
operation. Paint with metallic contents may limit device performances.
9. If the device or any accessory are not working properly, take it to your nearest qualified
INVENGO representative.
Do not clean the device, particularly the transparent plastic parts, with harsh
chemicals, cleaning solvents or strong detergents. Gently wipe the device
with a soft cloth slightly dampened in a mild soap-and-water solution.
Eliminate any residual moisture with another clean and wet soft cloth.
Also regularly apply specific antistatic products for Acrylic Surfaces.