User's Guide

LSP3A Clear User’s Guide
It is only for internal use and shall not be spread without permission
39
5.5.6 System Configuration
Figure 5.24: System Configuration
The main functions of this module are:
 Modify TCP/IP Configuration, including port.
 Synchronize the real time between the host computer and the device.
 Display device version.
 Upgrade firmware.
After modifying TCP/IP configuration, click “Apply Changes”. You can then decide to apply
the new TCP/IP configuration immediately by rebooting the pedestal, or to wait for next reboot to
apply it.
When DHCP function is checked, the device will assign an IP address according to the DHCP
server, and when there is no DHCP server, the device will use a static IP address.
When the Sync button is clicked, the host computer will send the local time to the device, and
the device will modify its real time clock to synchronize with the host computer.