User's Guide

LSP3A Clear User’s Guide
It is only for internal use and shall not be spread without permission
38
5.5.5 Tag Modification
Figure 5.23: Tag Modification
The module can operate on a single tag, provided the tag is placed in the RF field. When the
working antenna is single, the device will operate the tag within the RF field of the corresponding
antenna. When the working antenna is in Normal mode or All Channel mode, the device will
operate the tags in the RF field of the antenna through channel 2.
There are two ways to detect tags:
 No addressing
 UID(Detect with UID)
Click “Read” to read AFI/EAS/Signal Block/Multiple Blocks data.
Click “Write” to write AFI/EAS/Signal Block data.
Click “Lock” to lock AFI/EAS/Signal Block, data becomes read-only after locking.
In “Custom commands” section, refer to “BS ISO-IEC 15693”