User's Guide

LSP3A Clear User’s Guide
It is only for internal use and shall not be spread without permission
28
5.5.2 Basic Configuration
Figure 5.9: Basic Configuration
The Basic Configuration is used either:
 Select the type and content of the tag to be read.
 Select and setting the tag detection options.
 Setting antenna sensitivity.
 Setting RF Power and Working antennas.
 Setting regional standard.
Only the tag of ISO15693 protocol can be read and filtered, can choose whether to read UID
and Memory.
AFI and EAS are used to filter labels and only choose one mode at a time, when select the
AFI filtering mode, can select a value that triggers alarms. When the value is 0, all read tags will
trigger alarms.
Drag the antenna sensitivity bar to select the antenna sensitivity. A lower value indicates a
higher antenna sensitivity.
Drag the RF Power bar to select the RF Power, the minimum is 500mW and the maximum is
5000mW and each step is 500mW.
There are 6 antenna operating modes, which can be selected according to different
application scenarios.