User's Guide

LSP3A Clear User’s Guide
It is only for internal use and shall not be spread without permission
26
5.5.1 Navigation
After sign in to main page, the navigation is on the top of web page, including Restore、
Start/Stop Reading、Save Configuration、WaveformDisplay、Language(Choose) and Log Out
buttons.
Figure 5.6: Navigation
This navigation is used either:
 Restore the device to factory setting.
 Controls whether the device is in tag reading mode.
 The configuration parameters are saved to the device and take effect.
 Go to the waveform display page and display the signal waveform.
 Log Out and return to the Sign in web page.
The device will reboot after the factory settings are restored:

Figure 5.7: Restore the device
Click the Save Configuration button will save and take effect the configuration of
modules(Basic Configuration、Gate Options and System Configuration),the saved configurations
are saved even after the device is powered off.
Click the Waveform Display button will go to waveform display web page: