User's Guide

LSP3A Clear User’s Guide
It is only for internal use and shall not be spread without permission
6
3 System Overview
3.1 Key Features
As a standalone solution, INVENGO security pedestals do not need to be linked to the library
database and can still operate when the Integrated Library System (ILS) is down or under
maintenance. The security pedestal does not require additional equipment to operate.
The LSP3A pedestal features:
 Multi-protocol features which makes it compatible with ISO15693 chips
 NXP proprietary EAS mode supported for the C370 (NXP SLI), C370-L (NXP SLI-L)
chips
 AFI mode supported, with configurable AFI value (Multiple AFI values, up to 4)
 Multiple items Read-Memory supported in EAS mode for C370 (NXP SLI), C370-L
(NXP SLI-L)
 Standard Multiple items Read-Memory supported in AFI mode using the optional
command Read Multiple Blocks as described by the ISO15693-3
 Enhanced Multiple items Read-Memory supported in AFI mode for C370 (NXP SLI),
C370-L (NXP SLI-L), Tag-it ™HFI (Texas Instruments) chips, LRI-2K (STM).
 Read-Memory Data Model: up to 896-bits (28 blocks of 32bits)
 One electronic system block embedded into bottom of Pedestal
 A remotely accessible people counter based on dual photoelectric sensors coupled to a
reflector, allowing in and out traffic monitoring.
 Ethernet Networking Link communication for set up, database and patron counter value
retrieval
 Asynchronous Event Notification over the Network: pedestal sends automatically data
upon Book Detection, Patron Counter change, GPIO level change or Pedestal fault
detection.
 Trigger input to quickly power up and down remotely the pedestals using light cells
before and after the pedestal area. This lowers down the radio emission levels to the
strict minimum necessary.
 One Extra Open Drain Output to drive External Alarm Device: Webcam, Extra Remote
Display or Sound
It is a cost effective security system as it only requires a single RFID tag for both anti-theft
and identification purposes.
In addition to these standard features, the LSP3A Clear can be personalized upon demand
with the library identity printed on plastic covers. The electronic stays the same and performance
are unaltered compared to the LSP3A Clear standard model.