Product Manual

Typical Product Parameters
Everyday Series Wheelchairs/Sport Series Wheelchairs 8 Part No 1122172
TRANSFORMER ALL-SPORT
FRAME: Rigid - 606IT6 Aluminium
SEAT WIDTH: 12-20 inches (30.48 - 50.8 cm) - Outside to Outside of SEAT FRAME in 1-inch increments
SEAT DEPTH: 12 to 20-inches (30.48 - 50.8 cm)
SEAT-TO-FLOOR:
TALL FRAME: Front - 18 to 21-inch (45.72 - 53.34 cm), Rear -15 to 21-inch (38.1 - 53.34 cm)
SHORT FRAME Front - 16 to 18-inch (40.64 - 45.72 cm), Rear -15 to 18-inch (38.1 - 45.72 cm)
BACK STYLE: Fixed (Standard)
Fold Down (Optional)
BACK HEIGHT:
FIXED: 8 to 14 inches (20.32 - 45.72 cm)
ADJUSTABLE: 9 to11 inches (22.86 to 27.94 cm) in 1 inch (2.54 cm) increments.
10 to 14 inches (25.4 to 35.56 cm) in 1 inch (2.54 cm) increments.
12 to 16 inches (30.48 to 40.6 cm) in 1 inch (2.54 cm) increments.
14 to 18 inches (35.56 to 45.72 cm) in 1 inch (2.54 cm) increments
BACK ANGLE: Fixed 0° (Set at 90° to floor)
FOLDING: 75°, 80°, 85°, 95°, 95°
FIXED: Set at 90° to floor
FRAME LENGTH:
FRAME W/FOLDING
BACK: Seat depth plus 10 inches (25.4 cm)
FRAME W/FIXED BACK: Seat depth plus 8 inches (20.32 cm)
FOOTREST: Recessed: 4-inch (10.16 cm) Height/Angle Adjustable, Solid Platform (Standard)
SIDE - WHEEL
CLEARANCE: Adjustable 1/2 to 1-1/2 inches (1.27 - 3.81 cm)
REAR AXLE: Adjustable Axle Position, Quick-Release Axles
REAR WHEEL
CAMBER:
CAMBER TUBE WITH
SINGLE CAMBER Fixed: 12°, 15°, 18° or 20°
ADJUSTABLE CAMBER
SYSTEM: 0°, 3°, 6°, 12°
REAR WHEELS*:
22 INCH (OPTIONAL)
Double walled rim high flange hub (Standard)
Spinergy® Spox (Optional)
24 INCH (STANDARD):
25 INCH (OPTIONAL)
26 INCH (OPTIONAL)
700C (OPTIONAL)
REAR WHEEL TYRES:
22 INCH (OPTIONAL) Primo 25-501 (Standard)
24 INCH (STANDARD): Primo 25-540 (Standard)
Kenda (Optional)
25 INCH (OPTIONAL) Primo 25-559 (Standard)
Kenda (Optional)
26 INCH (OPTIONAL) Primo 25-590 (Standard)
Kenda (Optional)
700C (OPTIONAL) Cheng Shin CST Super HP (Standard)
Kenda (Optional)
HANDRIMS: Aluminum Welded Tab (Standard)
WHEEL LOCKS: N/A