Product Manual

SECTION 7—FOOTREST/ANTI-TIPPER
Part No 1122172 57 Everyday Series Wheelchairs/Sport Series Wheelchairs
FIGURE 7.6 Adjusting/Replacing Anti-Tipper
Installing/Removing/Adjusting Swivel Anti-Tip
NOTE:Forthisprocedure,refertoFIGURE 7.7onpage58.
NOTE:ThisappliestoanyTerminatororderedwithswivelanti‐tip.
Installing/Depth Adjustment
1. Loosensetscrewsonanti‐tipreceivers(FIGURE 7.7).
2. Slidetheswivelanti‐tipintotheant i‐tipreceivers.Positionswivelanti‐tipsoitisevenwithwheelsonchairorextends
beyondthem.Tightensetscrews.
Removing
1. Loosensetscrewsonanti‐tipreceivers(FIGURE 7.7).
2. Slidetheswivelanti‐tipoutofthereceivers.
PART NUMBER MEASUREMENT
1112178
21 - 1/8-inches
(53.66 cm)
DETAIL“A” - ANTI-TIPPER
ADJUSTMENT HOLES
Top Adjustment Hole
Anti-Tipper Bar
Release Buttons
Camber Clamp
Ground/
Floor
1-1/2 to 2 inch
(53.66 cm)
Clearance
Anti-Tipper
Socket
Hole
Anti-Tipper