Product Manual

SECTION 7—FOOTREST/ANTI-TIPPER
Part No 1122172 55 Everyday Series Wheelchairs/Sport Series Wheelchairs
Adjusting the Transformer Footrests
NOTE:Forthisprocedure,refertoFIGURE 7.4.
Depth
1. Removethetwomountingscrewsandlocknut sthatsecurethefootresttothefootrestclamp.
2. Movefootresttodesireddepth.
3. Aligntheholesinthefootrestwiththeholesinthe footrestclamp.
4. Securefootresttofootrestclampwithtwomountingscrews.Securelytighten.
Angle
1. Loosenthetwomountingscrewsinthefootrest.
2. Adjusttheangleofthefootrest.
3. Retightenthetwomountingscrews.Tightensecurely.
FIGURE 7.4 Adjusting the Transformer Footrests
Height
1. Notetheorderofthemountingscrew,covedwashers,
spacer,halfclampsandmountingscrew/threaded
sleeveandtheirpositiononthewheelchairframeand
footresttubing.
2. Removethemountingscrew,covedwashers,spacer,
halfclampsandmountingscrew/threadedsleeveon
bothsidesofthewheelchair.
3. Chooseanadjustmentholeonthefootrest
tubingthat
willraiseorlowerthefootresttothedesiredposition.
4. Reinstallthemountingscrew,covedwashers,spacer,
halfclampsandmountingscrew/threadedsleeveon
bothsidesofthewheelchair.Tightensecurely.
FIGURE 7.5 Adjusting the Transformer Footrests -
Height
Depth
Adjustment
Holes
Footrest
Locknuts
Mounting Screws
Footrest
Clamp
Depth
Angle
Mounting Screws
Footrest
Footrest
Footrest Tubing
Half Clamp
Mounting
Screw
Adjustment Holes
Half Clamp
Coved Washer
Coved
Washer
Mounting Screw/
Threaded Sleeve