Product Manual

SECTION 4—BACK
Part No 1122172 27 Everyday Series Wheelchairs/Sport Series Wheelchairs
7. Securetheadjustmentsquaretothebackangleplatewiththemountingscrew.Tightensecurely.
8. RepeatSTEPS2‐6forremainingback cane.
 WARNING
After unfolding the back, ensure that the plunger pins are fully engaged in the mounting holes of the
adjustment square in the back angle plates (Detail “A”). Otherwise, serious injury could result.
9. Unfoldthebackuntiltheplungerpinslockintothemountingholesintheadjustmentsquare.
10. Unthreadthemountingscrewuntilheadofscrew restsonseatrail(Detail“F”).
11. Completelytightenjamnutupagainstbottomofbackcane(Detail“F”).
NOTE:Whenadjustedproperly,thebackshouldhaveasmall
amountofmovementwhenlockedintheopenposition.Plungerpins
shouldsnapinandreleaseeasilywithoutresistance.
FIGURE 4.3 Back Angle Adjustment - Terminator Wheelchairs
Back Cane
Jam Nut
Placement
Screw
DETAIL “A”
Adjustment
Square
Mounting screw secures the adjustment
square from the other side of the plate
DETAIL “B”
Back Cane
Jam Nut
Placement
Screw
DETAIL “C”
Mounting Screw
NOTE:Backangleplate,mountingscrewandadjustment
squareareremovedforclarity.
Back Angle Plate
Adjustment
Square
Recess for
Adjustment
Square
Back
Angle
Plate
DETAIL “D”
Back
Cane
Seat
Rail
Mounting
Screw
Jam Nut