Product Manual

SECTION 4—FRONT RIGGINGS
Transport Chairs 16 Part No.1125095
SECTION 4—FRONT RIGGINGS
 WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is
tightened securely. Otherwise, injury or damage may result.
Installing Swingaway Footrest Assembly
NOTE:Forthisprocedure,refertoFIGU RE 4.1.
1. Turnthefootresttotheside(openfootplateis
perpendiculartotransportchair).
2. Installthehingeplatesonthefootrestontothehinge
pinsonthetransportchairframe.
3. Pushthefootresttowardstheinsideofthetransport
chairuntilitlocksintoplace.
NOTE:The
footplatewillbeontheinsideofthetransportchair
whenlockedinplace.
4. Repeatthisprocedurefortheotherfootrestassembly.
5. Toreleasethefootrest,pushthefootrestreleaselever
inward,rotatethefootrestoutward.
FIGURE 4.1 Installing Swingaway Footrest Assembly
Adjusting Footplate Height
NOTE:Forthisprocedure,refertoFIGU RE 4.2.
1. Removetheswingawayfootrestassembly.RefertoInstallingSwingawayFootrestAssembly
onpage 16.
NOTE:Laytheassemblyonaflatsurfacetosimplifythisprocedure.
2. Loosen,butDONOTremove,thefootplatemountingboltuntilthefootplateassemblymovesfreely.
3. Repositionthefootplateassemblytothedesiredheight.
4. Securelytightenthefootplatemountingbolt.
5. Repeatthisprocedurefortheotherfootrest,ifnecessary.
6. Reinstall
theswingawayfootrestassembly.RefertoInstallingSwingawayFootrestAssemblyonpage 16.
FIGURE 4.2 Adjusting Footplate Height
Footrest Release
Lever
Hinge Pins
Hinge
Plates
Swingaway
Footrest
Assembly
Footplate
Mounting Bolt
Footplate Assembly
Upper Footrest
Support