Product Manual

SECTION 5—COMPRESSOR OPERATION
HomeFill
®
Compressor 24 Part No 1100873
4. Momentarilypush DOWNontheouterring (sleev e)ofthe
connectorfillportuntilGREENdotsarevisibletoresetthe
connector(FIGURE5.1).
NOTE:Iftheouter ring(sleeve)isintheUPposition
(GREENdotsnotvisible),theconnectorfillportwillnotbe
abletoacceptthecylinderfillport.PushingDOWN
momentarilywillresettheconnectorfillport(GREENdots
visible)toacceptthecylinderfillport.
FIGURE 5.1 Resetting Connector Fillport
5. Graspthecylinderintheareabehindthecylinderfillport
(FIGURE5.2).
6. P ositionthecylinderinthecompressorcradle(FIGURE5.2).
7. Alignthecylinderfillportwiththeconnectorfillport
(FIGURE5.2).
8. PullUP ontheouterring(sleev e)oftheconnectorfillport
whilepushingDOWNonthecylindertocouplethecylinder
fillportintotheconnectorfillport(FIGURE5.2).
NOTE:Thecylinderisproperlyconnectedwhenanaudible“click”is
heard.
Connector Fillport
Outer Ring (Sleeve)
PUSH
DOWN
GREEN Dots
BEFORE
COUPLING
CYLINDER
PUSH DOWN
ON SLEEVE
UNTIL
GREEN DOTS
ARE VISIBLE