Product Manual

SECTION 3—INITIAL SETUP
HomeFill
®
Compressor 18 Part No 1100873
FIGURE 3.2 Installing the Power Cord
Connecting the Compressor to the Concentrator
NOTE:Forthispr ocedur e,refertoFIGURE3.3onpage 19.
1. Insertoneendof theinterconnecthoseintotheoutletfitting
onthebackoftheconcentrator(Detail“A ” ) .
2. Inserttheoppositeendoftheinterconnecthoseintotheinlet
fittingonthesideofthecompressor(Detail“B”).
NOTE:Themetaltabsontheconcentratoroutletfittingandthe
compressor inletfittingwillpopoutwithanaudible“click”whenthe
endoftheinterconnecthoseisproperlyinstalled(Detail“C”).
Wall
Outlet
Power
Cord
Compressor
(REAR)
Electrical
Connection
NOTE:Thisproductmaycomewithapolarizedplug(onebladeis
widerthantheother).Asasafetyfeature,thisplugwillfitina
polarizedoutletonlyoneway.Iftheplugdoesnotfitfullyinthe
outlet,reversetheplug.Ifitstilldoesnotfit,contactaqualified
electrician.DONOTattempttodefeatthissafetyfeature.