Product Manual

SECTION 3—INITIAL SETUP

Part No 1100873 17 HomeFill

Compressor

Transporting the Compressor

 WARNING

NEVERtransportacompressorwithacylinderconnectedtoor

storedonthecompressor ,otherwiseinjuryordamagecanoccur.

CAUTION

Whentransportingthecompressor,becarefulnottobumpthe

compressorortheconnectorsintoobstacles.Otherwise,damage

tothe compressormayoccur.

NOTE:Forthispr ocedur e,refertoFIGURE3.1.

1. Therearetwomethodsto

safelytransportthe

compressor:

•OneHand‐Graspthe

handgripatthe

bottomrearofthe

compressor.

•TwoHands‐ Graspthe

handgripsonthesides

ofcompressor.

FIGURE 3.1 Transporting the

Compressor

Installing the Power Cord

NOTE:Forthispr ocedur e,refertoFIGURE3.2onpage 18.

1. Chooseaproperlocation.RefertoChoosingalocationon

page 16.

2. MakesurethepowerswitchisintheOff(O)position

3. Plugthepowercordintotheelectricconnectorinthebackof

thecompre ssor.

4. Plugth eoppositeendofthepowercordinto thewalloutlet.

Hand Grip