Item Brochure

Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
[phone]
Canada
570 Matheson Blvd. E.,
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
[phone]
©2012
Invacare Corporation.
All rights reserved.
Trademarks are identified
by the symbols ™ and
®. All trademarks are
owned by or licensed
to Invacare Corporation
unless otherwise noted.
Specifications are subject
to change without
notification.
Form No. 11-174
Rev. 03/12
111222
HCPCS Code: E0310
HCPCS Code: E0310
Model # Rail Length* Rail Height Rail Height Width Shipping Limited
Above Deck Above Deck Between Weight Warranty
Raised Lowered Rails
6628-TSS 56" 14.5" 3.75" 38" 31.5 lb. 1 Year
6629 55" 14.5" 4.25" 36" 27.5 lb. 1 Year
6630 32" 15" 4.75" 36.5" 23.5 lb. 1 Year
6632 27" 14.5" N/A 36" 21 lb. 1 Year
BAR6640IVC 28.75" 15" 3.5" 42" 25 lb. 1 Year
*Measurement on flat bed with crossbraces installed as per instruction sheet.
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program, and should
consult an attorney or other advisor to discuss specific situations in further detail.
NOTE: Whenever bed rails are used as part of any hospital or home
care bed system, the potential for bed rail entrapment exists. To
reduce this risk, a patient must always be assessed regarding their
risk of entrapment before any product is used. Routine patient
monitoring is also required once a product is in use. To learn
more about the risk of bed rail entrapment please visit the US
FDA’s website at http://www.fda.gov and search for "Bed Rail
Entrapment."
Invacare
®
Reduced Gap Full-length Bed Rail
Model # 6629
Durable 7⁄8" chrome-plated, welded steel construction
Self-adjusting spring-loaded crossbraces snap easily into place without tools for
quick installation
Invacare
®
Reduced Gap Half-Length Bed Rail
Model # 6630
Heavy-duty 1" chrome-plated, welded steel construction
Dual flat-channel crossbraces are secured with wing-nut clamp assemblies
(some assembly required)
For optimal safety and convenience, four half-length rails are recommended
(one set for head area and one set for foot area)
Invacare
®
Assist Bed Rail
Model # 6632
Heavy-duty 1" powder coated, welded steel construction
3 positions: Guard, Assist, Transfers
Moves easily out of the way with a quick release button
Invacare
®
Extra-Wide
Full-length Bed Rail
Model # 6628-TSS
Heavy-duty 1" chrome-plated, welded steel construction
Self-adjusting extra-wide spring-loaded crossbraces snap
easily into place without tools for quick installation
Optional hardware is included for clamp-on
For use with TSS mattresses
Invacare
®
Reduced Gap
Heavy-Duty Half-Length Bed Rail
Model # BAR6640IVC
Heavy-duty 1" chrome-plated, welded steel construction
Bolt-on hardware for added strength
For optimal safety and convenience, four half-length rails are
recommended (one set for head area and one set for foot
area)
Use with BAR600IVC bed only
1
4
1.
4.
3
3.
2
5
2.
5.
HCPCS Code: E0305
HCPCS Code: E0305
HCPCS Code: E0305