Product Manual

10 TROUBLESHOOTING
Invacare
®
IVC
™
Model BAR600IVC Bariatric Bed 50 Part No 1123842
10 Troubleshooting
10.1 Troubleshooting: Electrical

WARNING
Read all general guidelines, warnings and cautions before performing any repair/maintenance on the bed. All repair and
maintenance on the bed should be performed by a qualified technician.
SYMPTOM PROBABLE CAUSE SOLUTIONS
Bed section does not move. End of stroke reached. Operate opposite button.
Full Electric Bed: Hi/Lo function does
not work.
Bed not plugged in. Ensure power cord is plugged into power source.
Pendant not functioning. Ensure Pendant correctly connected to junction box. Refer to FIGURE11.
Ensure Pendant cable is not entangled/pinched.
Cables Ensure motor cable(s) correctly connected. Refer to FIGURE11.
Ensure cables are not entangled/pinched.
Call the dealer for repair/replacement of cables and/or motors.
Household fuse or breaker
blown.
Check household fuse/breaker box.
Motors are not functioning. Call dealer.
Hi/Lo Motor Ensure Hi/Lo motor cable is correctly connected. Refer to FIGURE11.
Ensure cables are not entangled or pinched.
Ensure drive shaft is correctly installed.
Bed Spring does not stop moving. Pendant Check for depressed/stuck buttons. If button is stuck, call dealer for repair.
Bed Hi/Lo movement does not stop. Check cables. If damaged, call dealer.