Product Manual
9 MAINTENANCE
Invacare
®
IVC
™
Model BAR600IVC Bariatric Bed 46 Part No 1123842
9 MAINTENANCE
9.1 Washing Bed Ends
1. Stand or prop each bed end in an upright position on its legs.
2. Using a mild soap/detergent and soft bristle brush or sponge, scrub all exterior surfaces.
3. Using a hose and nozzle attachment, rinse bed ends thoroughly with plain cold or warm water.
4. Tip bed end from side to side to allow any collected or trapped water to drain.
5. Thoroughly towel dry bed end and all components.
6. Repeat drying process until all components are dry.
CAUTION
DO NOT wash head or foot section. AC motors and electronics are not water proof.
For this procedure, refer to FIGURE1.
DO NOT exceed a water temperature of 110° F.
Use household tap pressure. DO NOT use pressure washers or steam cleaners.
CAUTION
To protect flooring, ensure bed ends are completely drained and dry before placing on flooring. Otherwise, remaining dirty
water may damage or stain flooring.
Avoid spraying water directly into the gear box ends. Otherwise, damage to the gear box may occur.
For this procedure, refer to FIGURE1.
Ensure that the bed end is completely dry before storing.