Product Manual
8 PACKAGING, HANDLING AND SET-UP
Invacare
®
IVC
™
Model BAR600IVC Bariatric Bed 30 Part No 1123842
8.4 Set-Up
Assembling/Disassembling Head and Foot Sections
Assembling
1. Remove the head section of the bed from the packing carton.
2. Remove the foot section of the bed from the packing carton.
3. Remove tie-wraps securing the cables for shipping (FIGURE3 on page 31).
WARNING
DO NOT attempt to operate bed controls prior to completion of assembly as damage to bed components or personal
injury may occur.
For this procedure, refer to FIGURE4 on page 33.
Place the head section on a flat surface so that the motor guards on the bottom of the frame are supporting the head
section.
Place the foot section on a flat surface so that the motor guards on the bottom of the frame are supporting the foot
section.