User Guide

Bluetooth
®
technology:
Frequency range: 2.4-2.485 GHz
Operating Range Distance:
minimum 26.25 feet
(unobstructed)
Operating Channels:
40 channels
Security Encryption:
128-bit AES
(Advanced Encryption Standard)
Electrical and Safety Standards
The POGO Automatic Meter complies with the applicable standards for
Electromagnetic Compatibility; however, it is not recommended that it be used
in the presence of strong electromagnetic elds.
Since your POGO Automatic Meter is an electronic device, you should follow all
local environmental regulations for disposal.
Bluetooth
®
Wireless Technology
Your POGO Automatic Meter uses Bluetooth low energy technology to
communicate and transfer information optionally to your smartphone.
Bluetooth wireless technology is a form of radio frequency (RF) technology that
operates in the unlicensed industrial, scientic and medical band at 2.4 to 2.485
GHz. The RF channel utilized for communication between the meter and other
devices, such as a smartphone, is not an open channel. Your meter complies
with United States Federal Communication Commission (FCC) standards. This
meter has been tested and found to comply with the limits of a Class B digital
device, pursuant to FCC Part 15 Rules. Operation of the device is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Compliance with these
guidelines means that under normal, daily circumstances, the device should
not aect the operation of other devices. In addition, the device should operate
normally in the presence of other devices. In the event there is interference
from another device, the following measures are recommended:
Increase the distance between the meter and that device.
Turn o the interfering device.
In addition, you can turn o Bluetooth wireless technology
on the meter.
To obtain the FCC ID: When meter is sleeping (screen is black), hold the up
scroll button for 3 seconds and the Serial Number screen will appear. Press
the M-button to access Regulatory Labels. The FCC ID will be shown in the
Regulatory Labels.