User Manual

Weight Rating
• 5Lbs.
Warranty
• 5 year limited warranty from date of purchase
Related Items
• CLP-2 Zip Tie Mounting Clips
• UMC-1 Universal Mounting Clamps
• IWB-1 and IWB-2 in-wall enclosures
• CMP-1 Component Mounting Plate
If you have any questions or need assistance please
contact us at the following numbers or e-mail address:
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
CMK-1
Component
Mounting Kit
1. Attach Rubber Feet
***The rubber feet MUST be used for proper
mounting of the equipment.
a. Clean the bottom of the equipment to
remove all oils and dirt.
b. Remove the adhesive backer from
the rubber foot and attach to the
bottom of the equipment.
***The best application is to place the rubber feet
evenly spaced in 1/2” from the corners.
Thank you for purchasing the Intuitive CMK-1. We are
sure that you will be very happy with the product and its
ease of installation.
Please read this manual before installation.
For the installation you will need the following
tools:
• Drill with Philips head screwdriver bit
• Wire snips
Included with the CMK-1 Kit:
- 2ea. Zip Tie Mounts
- 2ea. Self Drilling Screws
- 4ea. Rubber Component Feet
- 2ea. Zip Tie Clips
- 1ea. Instruction Sheet