User`s manual

Windows

Standby and Hibernate, Shut down and Restart

If a computer/laptop connecting to an xtraCoN Unit is placed into

standby or hibernate mode, the display goes blank. When the

computer/laptop is again powered up (and unlocked if necessary) the

connected monitor returns to the same mode as it was before stand by or

hibernate.

If the computer/laptop is shut down, restarted and logged in, again the

connected display returns to the same mode as it was before shutdown.

Disconnect the xtraCoN Unit

If the xtraCoN Unit is powered off or the USB cable is removed from the

computer, the display blanks. All windows and icons move to the primary

screen.

Once the computer is reconnected or the xtraCoN Unit is powered up,

the display returns to the same mode as it was before disconnection or

powered off. However, windows and icons that were previously on the

screen will not be moved back.