User's Manual
Performing Capsule Endoscopy Chapter 3
3- 6
Check the initialization indicator (INI) of upper side of the
MiroCam® Receiver. Prior to beginning a procedure, this light
must be green.
Connect the data cable to the MiroCam® Receiver.
Indicator Description
SIG
Indicates status of signal from capsule
Green : Signal is being received from capsule
Yellow : Signal is not being received from capsule
INI
Initialization status of the MiroCam® Receiver
Green : The MiroCam® Receiver is initialized
Yellow : The MiroCam® Receiver is not initialized
BAT
Battery Status
Green : Fully charged
Yellow : Not charged
Wi-Fi
Wi-Fi Switch Status
(LED) On : Enabled
(LED) Off : Disabled
WARNING
DO NOT do begin the MiroCam® Capsule endoscopy
procedure when the MiroCam® Receiver¶VEDWWHU\LQGLFDWRU
is not green. This indicates battery is not fully charged or
out of order, and patient data may be lost.
CAUTION
Switch the MiroCam® Receiver off prior to connect the
sensor pad.