User's Manual
Chapter 1 Safety Information
1-5
1.2 Symbols for Safety
This section describes a set of symbols that the IEC (International
Electrotechnical Commission) has established for medical electronic
equipment to classify connections and warnings of any potential hazards.
EN980: Attention. See instruction manual for use.
IEC 878-02-03: Indicates that this is classified into Type BF equipment
EN 980: Denotes Date of Manufacture
EN 980: Denotes Address of Manufacture
,(&$11(;''HQRWHV³21´VWDWXVRIPDLQSRZHUVZLWFK
,(&$11(;''HQRWHV³2))´VWDWXVRIPDLQSRZHUVZLWFK
SN
EN 980: Denotes serial number
IEC 417-5031: Denotes DC (Direct Current)
IEC 417-5032: Denotes AC (Alternating Current)
A
Denotes Ampere, the unit of current
V
Denotes Volt, the unit of Voltage
Hz
Denote Hertz, the unit of Frequency
IEC 417-5021: Denotes potential equalization terminal
Single Use Only
Use by date
EN980: Authorized representative in the European community
IPX
Protected against the effects of continuous immersion in water