User's Manual

Chapter 3 Performing Capsule Endoscopy

3- 4

3.3 Examination Preparation

The following steps (3.3.1 to 3.3.4) explain the process to initialize the

receiver and register patient data for the capsule endoscopy procedure.

For more information see section 4.2.

3.3.1 Start System

n Turn on power of MiroCam® workstation.

n Click icon to start the MiroView™ 2.0 Operator.

n Insert the ID and password and click icon.

WARNING

Before starting the system, check the power rating for the

workstation.

3.3.2 Initialize the Receiver

n Connect the smaller connector of USB Cable to Receiver unit.

n Connect normal connector of USB cable to workstation.

n Turn on the power of the Receiver unit.

n Click icon in MiroView™ 2.0 Operator.

n After completing the required fields, click the button to

save the patient information onto the Receiver.