User's Manual

Chapter 1 Safety Information
1-11
n Connect USB cable to receiver only after mounting it on charger.
n DO NOT install any other programs onto the workstation utilized for
review and diagnosis of patient image data (i.e computers with the
MiroView™ software).
n The capsule is disposable and should not be reused.
n The capsule and sensor pads are medical waste, and should be
disposed of according to local regulations or WEEE directive on waste
disposal.
n Only use the capsule, receiver, data cables and sensor pads in the
medical environment condition.
n All products connected with the MiroCam® Endoscope system must be
compliant with requirements of IEC60950-1 or UL certifications.
n Check the outer surface of the endoscope for rough surfaces, sharp
edges, or protrusions which may cause a safety hazard.
n Please don’t try to cut the label.